REXROTH Z2S 6-1-6X/V R900347504 Check valves

Recommended tightening torque for set screw:3.7 Nm; Weight:0.57 kg; s1:15.5 mm; H1:12.5 mm; Designation of bearing:UC204-12G2T20; T min.:-20 °C; d:19.05 mm; C:12.8 kN; N:11mm; Z:16.5 mm;

J:76.2 mm; H1:11 mm; G:R1/8"; Designation of housing:PAE206-; d:30.16 mm; d1:44.1 mm; H:42.9 mm; A1:25 mm; T min.:-20 °C; B1:48.3 mm;

Inch - Metric:Metric; Profile:Complete with Outer; Minimum Buy Quantity:N/A; ra max:2 mm; UNSPSC:31171547; Bore:2.362 Inch | 60 Mill; F:77 mm; Fatigue limit load, Cu:15.4 kN; Separable:Outer Ring - Both Si;

Bearing Bore Shape:Round; Bearing Locking Device:Tapered Adapter Slee; Ring Size:Standard; UPC:782475991273; Retainer Type:Std Retainer; Housing Material:Cast Iron; Ball Bearing Housing Series:210 Series; Expansion Type:Non-Expansion; Seal Type:Single Lip; Bearing Insert Material:Steel;

A2:56.7 mm; S:11 mm; B1:43.7 mm; A:41.6 mm; T min.:-40 °C; A1:13 mm; Recommended tightening torque for set screw:8 Nm; s1:33.4 mm; T max.:100 °C; J:157 mm;

Cr:19.4 kN; B1:58 mm; Mass:0.25 kg; B3:8 mm; e:32 mm; Maximum tightening torque:76 Nm; B2:36.5 mm; G:M18X1.5; Characteristic rolling element frequency, BSF:12.03 Hz; Nlim (grease):4,500 rpm;

A1:12 mm; H2:51 mm; T max.:100 °C; C:12.8 kN; N2:32 mm; L1:61 mm; Designation of open end cover:SCOU204-12; H:89 mm; L:94 mm; L3:51 mm;

Designation of housing:PG212N-; d1:82 mm; G:M6x1; B1:49.3 mm; Designation of bearing:ES212G2; Designation of closed end cover:SCCE212; N:M16; C0:32.8 kN; H2:138 mm; A1:40 mm;

N2:64 mm; C:52.5 kN; G:M6x1; N:35mm; H1:130 mm; L1:119 mm; Designation of housing:T212-; Weight:4.4 kg; s1:39 mm; B1:49.3 mm;

S:21.4 mm; Weight:2.07 kg; H:188 mm; d:45 mm; Recommended tightening torque for set screw:11.5 Nm; s1:39.7 mm; T max.:200 °C; N:19mm; A2:56.9 mm; d1:62 mm;

N:18mm; B:33.4 mm; Z:35.6 mm; Designation of housing:PLE212N-; L:245 mm; C0:32.8 kN; Weight:4.9 kg; S:12 mm; H:68.3 mm; d:60 mm;

Precision Class:ABEC 1 | ISO P0; Fatigue limit load, Cu:0.01 kN; Inch - Metric:Metric; B:4 mm; Internal Clearance:Special; d:3 mm; Other Features:Deep Groove | Prelub; Inner Race Width:0 Inch | 0 Millimete; Rolling Element:Ball Bearing; Enclosure:2 Metal Shields;

d:25 mm; L2:10 mm; L1:62 mm; Recommended tightening torque for set screw:5.5 Nm; A5:17.4 mm; H1:76 mm; Z:16.7 mm; G:M6x1; L:97 mm; A1:12 mm;

L2:10 mm; Weight:1.43 kg; d:30 mm; S:8 mm; N1:16 mm; L1:70 mm; C0:11.5 kN; H:102 mm; A1:12 mm; B:23.8 mm;

Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; T min.:-40 °C; Designation of bearing:US208-24G2T04; d:38.1 mm; C:29.6 kN; A2:49 mm; A:39.5 mm; e:24 mm; s1:17 mm;