Precision accessories MFG.CORP
Precision accessories MFG.CORP
REXROTH Piston Pump 45 Displacement   REXROTH Piston Pump 71 Displacement   REXROTH POPPET DIRECTIONAL VALVE  
English
English
  • Home
  • Stock Categories
    • REXROTH Piston Pump 45 Displacement
    • REXROTH Piston Pump 71 Displacement
    • REXROTH POPPET DIRECTIONAL VALVE
    • REXROTH PRESSURE RELIEF VALVE
    • REXROTH Pressure Switch
    • REXROTH Solenoid Directional Valve
    • REXROTH THROTTLE VALVE
    • REXROTH Vane pump
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • FAG Bearing
    • ISOSTATIC Bearing
    • LINK BELT
    • NTN Bearing
    • SKF Bearing
    • TIMKEN Bearing
    • REXROTH Check valves
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Valves
    • REXROTH Twin throttle check valve
    • REXROTH Directional spool valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • hm807010 Bearing
    • lm12710 Bearing
    • 15245 Bearing
    • lm11910 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Precision Ball Bearings
    • High Precision Bearings
    • High Precision Ball Bearings
    • Roll Neck Bearings For Rolling Mill
  • Technical Articles
  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 45 Displacement

REXROTH Piston Pump 71 Displacement

REXROTH POPPET DIRECTIONAL VALVE

Home>Products>Roll Neck Bearings For Rolling Mill>Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

  • Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
  • Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

FAG Z-522742.ZL MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

category

Roll Neck Bearings For Rolling Mill

FAG Z-522742.ZL Bearing SPECIFICATIONS

  • Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL, Units Precision accessories MFG.CORP and 3.2 Calculation factor Y1 Housings CAD models , Roll Neck Bearings For Rolling Mill Manufacturing Service . Get Your Free.

  • FAG

  • Z-522742.ZL

  • 3.2
  • 7.5 mm
  • 941 mm
  • 830 mm
  • 112 mm
  • 670 mm
  • 816 mm
  • 4.8
Precision accessories MFG.CORP

Precision accessories MFG.CORPChina

  • Precision accessories MFG.CORP2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Sponsored Products Related To This Item

  • 3.2
  • 7.5 mm
  • 941 mm
  • 830 mm
  • 112 mm
  • 670 mm
  • 816 mm
  • 4.8
  • 6 mm
  • 90 mm
  • 736 mm
  • 300 r/min
  • 22.3 mm
  • 560 r/min
  • 860 kg
  • 965 kN
  • 12 mm
  • 1030 mm
  • 342 mm
  • 8669 kN

FAG Z-522742.ZL Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Code system

No.BrandSaAMbsLH
190RV2601NSK - - - - - - - -
23168CAW33C3SKF - - - - - - - -
38FC26168-1KOYO - - - - - - - -
145RV2101NSK - - 45 mm - - - 160 mm93 mm
NU2334MC3SKF - - - - - - - -
313823KOYO - - - - - - - -
23260CAW33C3SKF - - - - - - - 39 mm
23136CAW33C3SKF4.763 mm - - - - - 749.3 mm422.275 mm
220RV3101NSK - - - - - - - 257.175 mm
23180CAW33C3SKF - - - - - - - -
23160CAW33C3SKF - - - - - 30 mm1040 mm -
4R6819NTN - - - - - - 96 mm156 mm
4R4426NTN - - - - - - - -
190RV2701NSK - - - - - - - -
Z-527634.ZLFAG - - - - - - - 180 mm
200RV2901NSK - - - - - - - -
23128CAW33C3SKF - - - - - - - -
22348CAW33C3SKF - - - - - - - -
4R602NTN - - - - - - - -
23238CAKW33C3SKF - - - - - - - -
22336CAW33C3SKF - - 35 mm - - - 96 mm156 mm
145RV2201NSK - - - - - - - -
340RV4801NSK - - - - - - - 133.35 mm
Z-507344.ZLFAG0.794 mm - 76.2 mm - - 31.75 mm304.8 mm160.338 mm
4R2904NTN - - - - - - - -
22352CAW33C3SKF - - - - - - - -
280RV3903NSK4.763 mm - - - - - 539.75 mm -

 

23164CAW33C3 SKF MINING MACHINERY BEARINGSBasic Dynamic Radial Load Rating:5730 lbf; Dimension H1:1.8750 in; Thread Diameter G:1/2-13; Shaft Diameter D:1 7/16 in; Dimension S1:1.0000 in; Insert Bearing IB:ZMaRC; Basic Static Radial Load Rating Co:3440 lbf; Dimension F:0.7500 in; Width A:1.8750 in; Distance J:3.2500 in; Weight W:4.50 lb; Height H:3.7500 in; Dimension L:4.1250 in;
Z-508657.ZL FAG ROLL NECK BEARINGS for ROLLING MILLMass bearing:50.3 kg; D:340 mm; s max.:2.5 mm; Reference speed:2000 r/min; Basic dynamic load rating C:1600 kN; d:160 mm; F:204 mm; Da min.:292 mm; Da max.:321.9 mm; da max.:199 mm; da min.:177 mm; Calculation factor kr:0.2; B:114 mm; db min.:207 mm; Limiting speed:2400 r/min; D1 ≈:284.8 mm; Fatigue load limit Pu:196 kN; r1,2 min.:4 mm; ra max.:3 mm; Basic static load rating C0:2000 kN;
4R3226 NTN ROLL NECK BEARINGS for ROLLING MILLF:1053 mm; D:1220 mm; Basic dynamic load rating C:2640 kN; r1,2 min.:6 mm; da min.:1025 mm; Basic static load rating C0:6550 kN; Fatigue load limit Pu:400 kN; Limiting value e:0.2; Axial load factor Y:0.6; ra max.:5 mm; Reference speed:400 r/min; D1 ≈:1146 mm; d1 ≈:1072 mm; B:100 mm; Da max.:1196 mm; Limiting speed:530 r/min; Mass bearing:269 kg; db min.:1080 mm; Calculation factor kr:0.2;
NU2334MC3 SKF MINING MACHINERY BEARINGSFillet Radius ra:1.00 mm; B:16.00 mm; Grease Speed Rating Open/Shielded n1:10000 rpm; Oil Speed Rating Open/Shielded n2:13000 rpm; Accessories:Two Shields; Grease Speed Rating n1:10000 rpm; Sealed Speed Rating n3:7500 rpm; Oil Speed Rating n2:13000 rpm; d:30.000 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:11200 N; Basic Dynamic Radial Load Rating C:19500 N;
Z-524289.02.ZL FAG ROLL NECK BEARINGS for ROLLING MILLFatigue load limit Pu:0.98 kN; B:51.6 mm; d:44.45 mm; A1:15 mm; Limiting speed:4000 r/min; Db2:118 mm; GN:1/4-28 SAE-LT; DN:6.5 mm; J6:129 mm; J7:35.5 mm; A:43 mm; Recommended tightening torque for grub screw:16.5 N·m; Recommended diameter for attachment bolts, inch G:0.625 in; R1:28.5 mm; L:143 mm; N:18 mm; A5:33 mm; s1:32.6 mm; T:55.5 mm; Da:125.4 mm;
314553 KOYO ROLL NECK BEARINGS for ROLLING MILLCap bolt, SAE grade:5; H2:79.375 mm; J min.:549.275 mm; N1:34.925 mm; Max. speed for Taconite seal:560 r/min; Pa:54.3 kN; H1:200.025 mm; Cap bolt recommended tightening torque:271.2 N·m; R2:42.069 mm; Mass pillow block:178 kg; R1:120.65 mm; Da:339.999 mm; Initial grease fill:1672.65 g; Housing:SAF 632; J1:114.3 mm; P150°:94.3 kN; H:401.637 mm; P90°:173 kN; P180°:113 kN; A1:190.5 mm;
NU2332MC3 SKF MINING MACHINERY BEARINGSA5:18 mm; B4:5 mm; L:70 mm; Housing material:Composite; Fatigue load limit Pu:0.335 kN; Basic dynamic load rating C:14 kN; Thread grub screw G2:M6x0.75; d:25 mm; Da:63.5 mm; A3:3.2 mm; Basic static load rating C0:7.8 kN; Db:65 mm; Mass bearing unit:0.29 kg; Recommended diameter for attachment bolts, mm G:10 mm; B:34.1 mm; Limiting speed:1500 r/min; N:12.3 mm; H:124 mm; J:99 mm; Recommended diameter for attachment bolts, inch G:0.375 in;
4R5208 NTN ROLL NECK BEARINGS for ROLLING MILLB:56.00 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:2.00 mm; d:110.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:163000 N; Basic Static Radial Load Rating Co:204000 N; D:170.0000 mm; Grease Speed Rating n1:7000 rpm;
Z-529468.N12BA   FAG ROLL NECK BEARINGS for ROLLING MILLOil Speed Rating n2:3400 rpm; Grease Speed Rating n1:2400 rpm; Basic Static Radial Load Rating Co:156000 N; d:80.000 mm; D:170.0000 mm; Sealed Speed Rating n3:2400 rpm; Basic Dynamic Radial Load Rating C:182000 N; B:68.30 mm; Accessories:No Shield, no Seal,; Fillet Radius ra:2.00 mm;
Z-510150.02.ZL FAG ROLL NECK BEARINGS for ROLLING MILLGrease Speed Rating n1:1700 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:850000 N; D:320.0000 mm; B:140.00 mm; Oil Speed Rating n2:2100 rpm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:520000 N; d:110.000 mm;
313812W KOYO ROLL NECK BEARINGS for ROLLING MILLCap bolt, SAE grade:8; Da:309.999 mm; L:628.65 mm; PG:1/4 NPT; H2:69.85 mm; P60°:345 kN; Stabilizing ring:2 x 38151-40; R2:37.306 mm; H1:179.4 mm; P150°:113 kN; RG:3/4 NPT; P90°:207 kN; P120°:127 kN; P180°:133 kN; Max. speed for PosiTrac Plus seal:800 r/min; Housing:SAFS 040 KA; Initial grease fill:878.85 g; da:182.563 mm; Mass pillow block:156 kg; J min.:492.125 mm;
313837A KOYO ROLL NECK BEARINGS for ROLLING MILLBasic Dynamic Radial Load Rating C:134000 N; D:130.0000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; B:54.00 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating n2:4500 rpm; d:60.000 mm; Basic Static Radial Load Rating Co:143000 N; Accessories:One Shield & Snap-Ri;

 

 

Z-522742.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Video

 

FAG Z-522742.ZL INTERCHANGE

Roll Neck Bearings For Rolling Mill Part series Z-522742.ZL is a potential replacement for these common bearing part numbers:

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

  • Z-522742.ZL

Contact Us

Precision accessories MFG.CORP
Address124 North Bower Road, Macomb, IL 61255-2501 U.S.A.
Phone(Working Time)116-626-5622
Fax
  • Precision accessories MFG.CORP
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG Z-522742.ZL Technical Articles

How do you find the angle of a bearing?
Definition of Bearing - Math is FunIllustrated definition of Bearing: Three-Figure Bearings: The angle in degrees measured clockwise from North. It is common to put extra Bearings - Using bearings in trigonometry - National 5 MathsBearings ·...
How do you lubricate sealed bearings?
Bearing Relubrication - McGuire Bearing CompanyHow often should I grease my bearings, and how much grease do they need? · FOR STARTERS, note that most sealed bearings come pre-greased from the factory  Greasing shielded bearings ???? |...
How much do rear wheel bearings cost to replace?
Wheel Bearing Replacement Prices & Cost Estimates | KelleyHow long do wheel bearings last? In theory, wheel bearings could last as long as your car. Unlike oil changes or tire rotations, there's no standard  Wheel Bearing Replacement...

Roll Neck Bearings For Rolling Mill CATEGORIES

  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
  • REXROTH PRESSURE RELIEF VALVE
  • REXROTH Pressure Switch
  • REXROTH Solenoid Directional Valve
  • REXROTH THROTTLE VALVE
  • REXROTH Vane pump
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • FAG Bearing
  • ISOSTATIC Bearing
  • LINK BELT
  • NTN Bearing
  • SKF Bearing
  • TIMKEN Bearing
  • REXROTH Check valves
  • REXROTH Throttle check valve
  • REXROTH Pressure relief valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Pressure reducing valve
  • REXROTH Throttle check valves
  • REXROTH Valves
  • REXROTH Twin throttle check valve
  • REXROTH Directional spool valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • hm807010 Bearing
  • lm12710 Bearing
  • 15245 Bearing
  • lm11910 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Precision Ball Bearings
  • High Precision Bearings
  • High Precision Ball Bearings
  • Roll Neck Bearings For Rolling Mill
More

Customers Who Viewed FAG Z-522742.ZL Bearing Also Viewed

  • 22318CAW33C3 SKF MINING MACHINERY BEARINGS
  • 68FC48350D KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 314553 KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 313924 KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 313811 KOYO ROLL NECK BEARINGS for ROLLING MILL

Top Products

REXROTH ZDB10VP2-4X/315V PRESSURE RELIEF VALVE REXROTH A10VSO45FHD/31R-PPA12N00 Piston Pump 45 Displacement SKF CTN104ZMG Take Up Unit Bearings
NTN 6012ZZC3/EM Single Row Ball Bearings Timken l68111 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Precision accessories MFG.CORP. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 45 Displacement
    • REXROTH Piston Pump 71 Displacement
    • REXROTH POPPET DIRECTIONAL VALVE
    • REXROTH PRESSURE RELIEF VALVE
    • REXROTH Pressure Switch
    • REXROTH Solenoid Directional Valve
    • REXROTH THROTTLE VALVE
    • REXROTH Vane pump
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • FAG Bearing
    • ISOSTATIC Bearing
    • LINK BELT
    • NTN Bearing
    • SKF Bearing
    • TIMKEN Bearing
    • REXROTH Check valves
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Valves
    • REXROTH Twin throttle check valve
    • REXROTH Directional spool valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • hm807010 Bearing
    • lm12710 Bearing
    • 15245 Bearing
    • lm11910 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Precision Ball Bearings
    • High Precision Bearings
    • High Precision Ball Bearings
    • Roll Neck Bearings For Rolling Mill
  • Technical Articles
  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 45 Displacement

REXROTH Piston Pump 71 Displacement

REXROTH POPPET DIRECTIONAL VALVE

Contact Us