Precision accessories MFG.CORP
Precision accessories MFG.CORP
REXROTH Piston Pump 45 Displacement   REXROTH Piston Pump 71 Displacement   REXROTH POPPET DIRECTIONAL VALVE  
English
English
  • Home
  • Stock Categories
    • REXROTH Piston Pump 45 Displacement
    • REXROTH Piston Pump 71 Displacement
    • REXROTH POPPET DIRECTIONAL VALVE
    • REXROTH PRESSURE RELIEF VALVE
    • REXROTH Pressure Switch
    • REXROTH Solenoid Directional Valve
    • REXROTH THROTTLE VALVE
    • REXROTH Vane pump
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • FAG Bearing
    • ISOSTATIC Bearing
    • LINK BELT
    • NTN Bearing
    • SKF Bearing
    • TIMKEN Bearing
    • REXROTH Check valves
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Valves
    • REXROTH Twin throttle check valve
    • REXROTH Directional spool valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • hm807010 Bearing
    • lm12710 Bearing
    • 15245 Bearing
    • lm11910 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Precision Ball Bearings
    • High Precision Bearings
    • High Precision Ball Bearings
    • Roll Neck Bearings For Rolling Mill
  • Technical Articles
  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 45 Displacement

REXROTH Piston Pump 71 Displacement

REXROTH POPPET DIRECTIONAL VALVE

Home>Products>Roll Neck Bearings For Rolling Mill>Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

  • Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
  • Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

FAG Z-512764.ZL MODELS

Need a CAD or 3D Model?

Contact NowWhatsAppBe Our Agent

Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL

category

Roll Neck Bearings For Rolling Mill

FAG Z-512764.ZL Bearing SPECIFICATIONS

  • With 39.014 mm Ca over 10170 full-service stores, our Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL inventory is LOR 37 Labyrinth ring (dc shaft position) extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving Precision accessories MFG.CORP time and your hard-earned dollars.

  • FAG

  • Z-512764.ZL

  • LOR 37
  • 39.014 mm
  • 19.1 kN
  • 107.73 g
  • 2 x 1/2-13 UNC
  • LOR 55
  • 1/8 NPT
  • 120 mm
Precision accessories MFG.CORP

Precision accessories MFG.CORPChina

  • Precision accessories MFG.CORP2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Sponsored Products Related To This Item

  • LOR 37
  • 39.014 mm
  • 19.1 kN
  • 107.73 g
  • 2 x 1/2-13 UNC
  • LOR 55
  • 1/8 NPT
  • 120 mm
  • SAF 213
  • 15.875 mm
  • 12 kN
  • 9.07 kg
  • 1/8 NPT
  • 77.787 mm
  • 30.2 kN
  • 19.05 mm
  • 147.637 mm
  • 76.2 mm
  • B10724-53
  • EPR 7

FAG Z-512764.ZL Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Code system

No.BrandSaAMbsLH
Z-507333.ZLFAG4.763 mm - - - - - - 292.1 mm
313811KOYO - - - - - - - -
4R5208NTN - - - - - - - -
200RV2802NSK - - - - - - - -
160RV2302NSK - - - - - - - -
22228CAW33C3SKF - - - - - - - -
23256CAW33C3SKF - - - - - - - -
4R6819NTN - - - - - - 96 mm156 mm
23252CAKW33C3SKF - - 32.5 mm - - - 83 mm141.5 mm
22248CAW33C3SKF4.763 mm - - - - - 831.85 mm -
4R3232NTN - - - - - - - -
340RV4801NSK - - - - - - - 133.35 mm
4R4039NTN - - - - - - - -
160RV2301NSK - - - - - - - 145 mm
Z-543975.ZLFAG - - - - 22.3 mm - - -
4R304NTN - - - - - - - -
23176CAW33C3SKF - - - - - - - -
22236CAW33C3SKF - - - - 13.5 mm - - -
NU2338MC3SKF - 22.1 mm - - - - - -
22252CAW33C3SKF - - - - - - - -
22318CAW33C3SKF - - - - - - - -
145RV2101NSK - - 45 mm - - - 160 mm93 mm
Z-507536.ZLFAG - - - - - - - -
Z-524289.02.ZLFAG - - 43 mm - - - 143 mm -

 

Z-508727.ZL FAG ROLL NECK BEARINGS for ROLLING MILLAppropriate attachment bolt size G:1 in; Stabilizing ring:SR-34-0; P180°:92.5 kN; End plug (suffix Y):EPR 18; H1:179.375 mm; A1:171.45 mm; H2:69.85 mm; P120°:85.9 kN; Da:309.999 mm; PG:1/4 NPT; P60°:234 kN; J max.:549.275 mm; Pa:56 kN; Eye bolt:2 x 3/8-16 UNC; R1:115.888 mm; J1:107.95 mm; H:360.363 mm; h:54.769 mm; Cap bolt, SAE grade:5; Mass pillow block:132 kg;
22228CAW33C3 SKF MINING MACHINERY BEARINGSD:125.0000 mm; B:31.00 mm; Basic Static Radial Load Rating Co:13700 N; d:70.000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:3400 rpm; Basic Dynamic Radial Load Rating C:34500 N;
314199 KOYO ROLL NECK BEARINGS for ROLLING MILLD:279.4 mm; C:36.512 mm; Fatigue load limit Pu:76.5 kN; a:60.556 mm; ra max.:3.5 mm; Cb min.:9.5 mm; Da min.:254 mm; B:49.212 mm; r1,2 min.:3.5 mm; Reference speed:1600 r/min; Basic static load rating C0:830 kN; Dimension series:67900; Calculation factor e:0.5; Da max.:264.5 mm; Limiting speed:2000 r/min; T:46.038 mm; Ca min.:8 mm; Calculation factor Y:1.2; db min.:215 mm; Basic dynamic load rating C:465 kN;
Z-507333.ZL FAG ROLL NECK BEARINGS for ROLLING MILLS:4.763 mm; da:109.537 mm; P60°:308 kN; Max. speed for Taconite seal:700 r/min; P150°:118 kN; h:60.325 mm; Cap bolt recommended tightening torque:515.2 N·m; H2:60.325 mm; H:292.1 mm; Taconite seal:TER 115; R1:79.375 mm; Ca:73.812 mm; RG:1/2 NPT; Housing:SSAFS 526; Pa:24.9 kN; Da:230 mm; P180°:151 kN; Eye bolt:2 x 3/8-16 UNC; End plug (suffix Y):EPR 15; ba:57.944 mm;
Z-507336.ZL FAG ROLL NECK BEARINGS for ROLLING MILLCap bolt recommended tightening torque:81.3 N·m; RG:1/4 NPT; Mass pillow block:12.7 kg; P150°:18.2 kN; H2:28.575 mm; R1:46.038 mm; A1:79.375 mm; Appropriate attachment bolt size G:0.5 in; L:285.75 mm; ba:30.163 mm; da:60.325 mm; J max.:244.475 mm; H:157.559 mm; Da:130 mm; R2:21.431 mm; Labyrinth ring:2 x LOR 36; P120°:20 kN; A2:118.666 mm; Ca:37.008 mm; Bearing limiting speed:6700 r/min;
23148CAW33C3 SKF MINING MACHINERY BEARINGSBore Diameter D:20 mm; Outher Width C:14 mm; Dimension S:12.7 mm; Basic Dynamic Radial Load Rating:10600 N; Inner Width B:31.0 mm; Set Screw Size SSS:M6*0.75*5; Max Fillet Rad. MFR:0.6 mm; Dimension D3:28.20 mm; Outside Diameter D2:47 mm; Basic Static Radial Load Rating Co:6550 N; Weight W:0.14 kg;
Z-527104.ZL FAG ROLL NECK BEARINGS for ROLLING MILLOil Speed Rating n2:6300 rpm; D:120.0000 mm; d:65.000 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; Grease Speed Rating n1:5300 rpm; B:23.00 mm; Basic Dynamic Radial Load Rating C:55900 N; Grease Speed Rating Open/Shielded n1:5300 rpm; Basic Static Radial Load Rating Co:40500 N; Accessories:Two Seals; Sealed Speed Rating n3:3600 rpm; Fillet Radius ra:1.50 mm;
4R602 NTN ROLL NECK BEARINGS for ROLLING MILLBasic static load rating C0:7800 kN; Operating clearance factor k2:0.11; Reference speed:670 r/min; Misalignment factor k1:0.113; d:480 mm; Limiting speed:900 r/min; ra max.:5 mm; Da min.:620 mm; Mass bearing:210 kg; D:700 mm; B:165 mm; D1 ≈:640 mm; Da max.:677 mm; s1 max.:35.5 mm; d2 ≈:555 mm; r1,2 min.:6 mm; Basic dynamic load rating C:4050 kN; Ca min.:2.3 mm; Fatigue load limit Pu:530 kN;
Z-507344.ZL FAG ROLL NECK BEARINGS for ROLLING MILLH2:47.625 mm; H:160.338 mm; Limiting speed:2800 r/min; Mass bearing unit:10.9 kg; B:92.075 mm; A1:99.219 mm; H1:79.375 mm; L:304.8 mm; J max.:247.65 mm; J min.:234.95 mm; S:0.794 mm; d2:111.125 mm; da:74.612 mm; Basic dynamic load rating C:158 kN; s:31.75 mm; Attachment bolt diameter G:19.05 mm; A:76.2 mm;
314553 KOYO ROLL NECK BEARINGS for ROLLING MILLCap bolt, SAE grade:5; H2:79.375 mm; J min.:549.275 mm; N1:34.925 mm; Max. speed for Taconite seal:560 r/min; Pa:54.3 kN; H1:200.025 mm; Cap bolt recommended tightening torque:271.2 N·m; R2:42.069 mm; Mass pillow block:178 kg; R1:120.65 mm; Da:339.999 mm; Initial grease fill:1672.65 g; Housing:SAF 632; J1:114.3 mm; P150°:94.3 kN; H:401.637 mm; P90°:173 kN; P180°:113 kN; A1:190.5 mm;
160RV2302 NSK ROLL NECK BEARINGS for ROLLING MILLTolerance shaft:f7 m/s; Tolerance housing:H7 m/s; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:1 m/s; Mass bushing:0.017 kg; D:23 mm; Coefficient of friction µ max.:0.15; Specific static load factor K0:120 N/mm²; d:20 mm; Specific dynamic load factor K:40 N/mm²; B:20 mm;
22332CAW33C3 SKF MINING MACHINERY BEARINGSB:30.20 mm; Oil Speed Rating n2:6300 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:4800 rpm; Basic Static Radial Load Rating Co:58500 N; Grease Speed Rating n1:4800 rpm; d:50.000 mm; D:90.0000 mm; Basic Dynamic Radial Load Rating C:53900 N; Accessories:Two Seals & Snap-Rin;

 

 

Z-512764.ZL FAG ROLL NECK BEARINGS for ROLLING MILL Video

 

FAG Z-512764.ZL INTERCHANGE

Roll Neck Bearings For Rolling Mill Part series Z-512764.ZL is a potential replacement for these common bearing part numbers:

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

  • Z-512764.ZL

Contact Us

Precision accessories MFG.CORP
Address124 North Bower Road, Macomb, IL 61255-2501 U.S.A.
Phone(Working Time)116-626-5622
Fax
  • Precision accessories MFG.CORP
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

FAG Z-512764.ZL Technical Articles

How do you find the angle of a bearing?
Definition of Bearing - Math is FunIllustrated definition of Bearing: Three-Figure Bearings: The angle in degrees measured clockwise from North. It is common to put extra Bearings - Using bearings in trigonometry - National 5 MathsBearings ·...
How do you lubricate sealed bearings?
Bearing Relubrication - McGuire Bearing CompanyHow often should I grease my bearings, and how much grease do they need? · FOR STARTERS, note that most sealed bearings come pre-greased from the factory  Greasing shielded bearings ???? |...
How much do rear wheel bearings cost to replace?
Wheel Bearing Replacement Prices & Cost Estimates | KelleyHow long do wheel bearings last? In theory, wheel bearings could last as long as your car. Unlike oil changes or tire rotations, there's no standard  Wheel Bearing Replacement...

Roll Neck Bearings For Rolling Mill CATEGORIES

  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
  • REXROTH PRESSURE RELIEF VALVE
  • REXROTH Pressure Switch
  • REXROTH Solenoid Directional Valve
  • REXROTH THROTTLE VALVE
  • REXROTH Vane pump
  • AMI Bearing
  • CONSOLIDATED BEARING
  • DODGE Bearing
  • FAG Bearing
  • ISOSTATIC Bearing
  • LINK BELT
  • NTN Bearing
  • SKF Bearing
  • TIMKEN Bearing
  • REXROTH Check valves
  • REXROTH Throttle check valve
  • REXROTH Pressure relief valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Pressure reducing valve
  • REXROTH Throttle check valves
  • REXROTH Valves
  • REXROTH Twin throttle check valve
  • REXROTH Directional spool valves
  • REXROTH Directional poppet valves
  • REXROTH Throttle valves
  • hm807010 Bearing
  • lm12710 Bearing
  • 15245 Bearing
  • lm11910 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Kaydon Slewing Bearing
  • Bearing Slewing Ring
  • Precision Ball Bearings
  • High Precision Bearings
  • High Precision Ball Bearings
  • Roll Neck Bearings For Rolling Mill
More

Customers Who Viewed FAG Z-512764.ZL Bearing Also Viewed

  • 22318CAW33C3 SKF MINING MACHINERY BEARINGS
  • 68FC48350D KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 314553 KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 313924 KOYO ROLL NECK BEARINGS for ROLLING MILL
  • 313811 KOYO ROLL NECK BEARINGS for ROLLING MILL

Top Products

REXROTH ZDB10VP2-4X/315V PRESSURE RELIEF VALVE REXROTH A10VSO45FHD/31R-PPA12N00 Piston Pump 45 Displacement SKF CTN104ZMG Take Up Unit Bearings
NTN 6012ZZC3/EM Single Row Ball Bearings Timken l68111 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Precision accessories MFG.CORP. Copyright © 2017 - 2024 All Rights Reserved.

  • Home
  • Stock Categories
    • REXROTH Piston Pump 45 Displacement
    • REXROTH Piston Pump 71 Displacement
    • REXROTH POPPET DIRECTIONAL VALVE
    • REXROTH PRESSURE RELIEF VALVE
    • REXROTH Pressure Switch
    • REXROTH Solenoid Directional Valve
    • REXROTH THROTTLE VALVE
    • REXROTH Vane pump
    • AMI Bearing
    • CONSOLIDATED BEARING
    • DODGE Bearing
    • FAG Bearing
    • ISOSTATIC Bearing
    • LINK BELT
    • NTN Bearing
    • SKF Bearing
    • TIMKEN Bearing
    • REXROTH Check valves
    • REXROTH Throttle check valve
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • REXROTH Throttle check valves
    • REXROTH Valves
    • REXROTH Twin throttle check valve
    • REXROTH Directional spool valves
    • REXROTH Directional poppet valves
    • REXROTH Throttle valves
    • hm807010 Bearing
    • lm12710 Bearing
    • 15245 Bearing
    • lm11910 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Kaydon Slewing Bearing
    • Bearing Slewing Ring
    • Precision Ball Bearings
    • High Precision Bearings
    • High Precision Ball Bearings
    • Roll Neck Bearings For Rolling Mill
  • Technical Articles
  • REXROTH Piston Pump 45 Displacement
  • REXROTH Piston Pump 71 Displacement
  • REXROTH POPPET DIRECTIONAL VALVE
✖

Home

Stock Categories

Technical Articles

REXROTH Piston Pump 45 Displacement

REXROTH Piston Pump 71 Displacement

REXROTH POPPET DIRECTIONAL VALVE

Contact Us